RDC
TX-750C - 5 Input Transmitter
- Reports a 4 digit code number, customer ID and 3 Telemetry conditions:
- Open/close
- Panic
- Alarm
- Low battery
- Self-test
- Engineer test
- Telemetry 5
- Dedicated mains fail/restore
$ 31.39
excl. VAT
Important
Test
Mnf. code:
90010-4104-TX-750C
Availability:
Operation
The VHF Transmitter offers the following additional features:
- Field programmable features for on-site convenience.
- Synthesized design.
- Engineer test button - for easy on-site testing.
- Low battery reporting.
- Multiple lock-on protection features.
- Internal pull-up resistors for negative trip eliminates the need for external resistors.
- All inputs may be programmed individually for positive or negative trip making the transmitter compatible with any control panel.
- A power-up signal is sent which can indicate that the transmitter has been tampered with by an insider.
- Intelligent mains fail/restore signalling varies signal delays reducing unnecessary network congestion during power failures. The installer, however, can test mains fail/restore signals without delay for five minutes after applying power to the unit. The mains fail delay can now be set for between 15 - 250 minutes.
- Signal buffering is used when inputs are triggered simultaneously. Signals are stored in the transmitter and sent in event order.
- Manufactured using the latest surface mounting techniques which minimises the chances of human error.
- The transmitter draws less current placing less strain on the system battery.
- LED indicates seven different transmitter conditions for fast and simple diagnostics.
Transmitter Specifications |
|
Frequency Range |
132 - 174 MHz
|
Channel Spacing |
12.5 KHz
|
Operating Voltage |
10.5 to 13.8 Volts DC
|
Modulation Method |
FM
|
Ferquency Tolerance |
5 ppm
|
Narrow Bandwidth Spurious Emissions: |
|
Harmonic |
> 60dB
|
Non Harmonic |
> 70dB
|
Deviation |
|
Adjustable |
Between 1.5 KHz and 2.5 KHz
|
Nominal |
Approximately 2KHz
|
Temperature Range |
-10 to +10 C
|
Class Emision |
F3E
|
Antenna Impendance |
50 Ohms
|
Current Consumption: |
|
Standby |
30 mA
|
Transmit |
1.8 Amps at 12V nominal
|
Dimension |
|
Overall Dimensions |
112mm x 81mm x 24mm
|
Mounting |
2 x 7mm hole
|
Antenna Socket |
Internal tamper proof antenna connection
|
Transmission Duration |
90 - 360 mS
|
Telemetry Inputs |
|
Inputs |
5
|
Inputs Connections |
Screw terminals
|
General |
|
QTY |
50 Units
30 Units
10 Units
5 Units
|